What You Need to Know About Plenum Cables

What You Need to Know About Plenum Cables

What You Need to Know About Plenum Cables

Before you install any network cables in any commercial or residential building, the first thing you need to know is the plenum space. What is the plenum space? It is nothing but an empty space that is located between an original and structured ceiling.

Plenum space is a such a vital part of the building which is made with an aim to facilitate air circulation for heating and air-conditioning systems.

This space provides the way for heated or conditioned air to flow out of the room. Accordingly, this plenum space allows maintaining atmospheric pressure inside a building. And in this space, you need to install special wires such as Cat 5e plenum network cable to provide ensure efficiency.

Sometimes, when a plenum space grasps so much of the heated/conditioned air, it becomes insistent to get cables protective enough to resist it.

Thus, to avoid any kind of inconvenience in the transmission of networking, install plenum cables. Because it is made especially for multi-story building with plenum spaces.

What is a Plenum Cable?

Generally, a plenum cable is an electrical cable coming jacketed in a plastic. The material used in the coating is fire-retardant. It can be either a low-smoke polyvinyl chloride (PVC) or a fluorinated ethylene polymer (FEP).

These plenum cables are jacketed with such preventive materials that are considered as the best choice for networking of commercial buildings.

In addition to this, plenum cables used in buildings are known as CMP. And it stands for Communications Multipurpose Plenum. The CMP set is the perfect example to bring up a solution for all the types of low voltage, environmental air space applications.

Why You Need a Plenum Cable

Nowadays, most of the commercial and residential buildings have networking communications.

Every equipment or machinery used in the building sludge out heat. So, for this reason, it becomes unsafe to maintain atmospheric pressure inside the room. As a result, for a proper air circulation, a plenum cable is a must.

In some cases, when a building’s plenum space has not proper airflow circulation, there may be the chance of breaking out the fire and it can be a life-threatening experience with a huge loss at the cost of your lives. Thus, it is recommended to install CMP cables in the plenum spaces of a building. 

In addition to this, space which is spared with the purpose to handle the airflow is loaded with the oxygen. So, if the installation of cables is not done properly, it might be at risk. At this point, the use of plenum cables work wonder and efficiently, too.

Thus, if you want to reduce the risk, install plenum rated cables along with an efficient category such as Cat 5, Cat5e, Cat6, Cat6a, or Cat7; it offers perfect results.

Final Note

Now that you’re aware of the entire scenario of the plenum rated cable, the ball is in your court. So, be assured about the safety when you look after the wiring of network communications. Just make sure that you’re getting familiar with the right piece of information and buying cables for cable installation from a reliable provider.

Leave a Comment

Your email address will not be published.